Important Key Steps from Correct Product Specification, through to Product Sample Approval STEP 1

• Decide which Melcourt products are most suitable for your particular project.
  See Melcourt's FREE Product Selection and Text Service

STEP 2

• Transpose the recommended text for each product selected, as set out within the , for each Melcourt Technical Information Product Sheet, into the appropriate section within the Contract Documents and Bill of Quantities.

STEP 3

• Decide whether to 'nominate' or 'specify' the chosen Melcourt product.
  See Product Specification within Tender Documents

STEP 4

• Put your project out to tender and select a suitable contractor to do the work etc. on a 'lowest cost' or 'best value' basis.
  See 'Best Value'

STEP 5

• If you are selecting products yourself, carefully compare each supplier's quotation.
  See Checklist for Loose Impact Absorbing Surface (LIAS) Quotation Comparison.

STEP 6

• If you are not able to 'nominate' Melcourt products, take extra care before approving product samples put forward by the contractor for your approval.
  See Checklist for Product Sample Approval

Should you require any further help or clarification with any of the steps outlined above, we would be pleased to help.